Cpu Core Speed Derivation Procedure; Cpu Clock Selection - MSI MS-6390 User Manual

Chapter 2

CPU Core Speed Derivation Procedure

If CPU Clock
Core/Bus ratio
then CPU core speed

CPU Clock Selection

The hardware configuration for CPU Front Side Bus (FSB) frequency on
the motherboard is set to 100MHz by default. Therefore, to enable a 133MHz
CPU to run at 133MHz when it is installed on the board, you have to adjust the
CPU clock frequency through the jumper SW1.
For more information on the issue, refer to CPU FSB Clock Jumper: SW1
later in this chapter.
Overclocking
This motherboard is designed to support overclocking.
WARNING!
However, please make sure your components are able to
tolerate such abnormal setting, while doing overclocking.
Any attempt to operate beyond product specifications is
not recommended. We do not guarantee the damages or
risks caused by inadequate operation or beyond product
specifications.
= 100MHz
= 7
= Host Clock x Core/Bus ratio
= 100MHz x 7
= 700MHz
2-4