Table of Contents
Advertisement
separately.
Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO
mode (0-4) for each of the four IDE devices that the onboard IDE interface
supports. Modes 0 through 4 provide successively increased
performance. In Auto mode, the system automatically determines the
best mode for each device. The settings are: Auto, Mode 0, Mode 1,
Mode 2, Mode 3, Mode 4.
Primary/Secondary Master/Slave UDMA
Ultra DMA/33/66/100 implementation is possible only if your IDE hard
drive supports it and the operating environment includes a DMA driver
(Windows 95 OSR2 or a third-party IDE bus master driver). If your hard
drive and your system software both support Ultra DMA/33, Ultra DMA/
66 or even Ultra DMA/100, select Auto to enable BIOS support. Settings:
Auto, Disabled.
VIA OnChip PCI Device
Press <Enter> to enter the following sub-menu screen.
VIA-3058 AC97 Audio
Auto allows the mainboard to detect whether an audio device is used. If
an audio device is detected, the onboard AC'97 (Audio Codec'97) con-
troller will be enabled; if not, it is disabled. Disable the controller if you
want to use other controller cards to connect an audio device. Settings:
Auto, Disabled.
3-17
BIOS Setup
Hide quick links:
Advertisement
Table of Contents
