MSI MS-6390 User Manual page 62

Chapter 3
Power Management Option
This item is used to select the degree (or type) of power saving and is
related to these modes: Doze Mode and Suspend Mode. There are three
options for power management:
Min Saving Minimum Power Management. Doze Mode = 1 Hour,
Max Saving Maximum Power Management. Doze Mode = 1 Min.,
User Define Allows end users to configure each mode separately.
HDD Power Down
If HDD activity is not detected for the length of time specified in this field,
the hard disk drive will be powered down while all other devices remain
active. Settings: Disable and 1 through 15 Min.
Doze Mode
If system activity is not detected for the length of time specified in this field,
the CPU clock will run at slower speed while other devices still run at full
speed. Settings: Disable, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20
Min, 30 Min, 40 Min, 1 Hour.
Suspend Mode
If system activity is not detected for the length of time specified in this field,
all devices except CPU will be shut off. Settings: Disable, 1 Min, 2 Min, 4
Min, 8 Min, 12 Min, 20 Min, 30 Min, 40 Min, 1 Hour.
PM Control by APM
Setting to Yes will activate an Advanced Power Management (APM) device to
enhance Max Saving mode and stop CPU internal clock. Settings: Yes, No.
MODEM Use IRQ
This setting names the interrupt request (IRQ) line assigned to the modem (if
any) on your system. Activity of the selected IRQ always awakens the system.
Setting options: 3, 4, 5, 7, 9, 10, 11, NA.
Soft-Off by PWRBTN
This feature allows users to configure the power button function. Settings
are:
Instant-Off
Suspend Mode = 1 Hour.
Suspend Mode = 1 Min.
The power button functions as a normal power-on/-
3-22