MSI MS-6390 User Manual page 60

Chapter 3
channel 3 or 1.
Game Port Address
This item is used to specify the address for the onboard game port.
Midi Port Address
The field specifies the base I/O port address for the onboard Midi Port.
Midi Port IRQ
The item is used to select the IRQ line for onboard Midi port.
Init Display First
This item specifies which VGA card is your primary graphics adapter. Settings:
PCI Slot and AGP.
OnChip USB Controller
This setting is used to enable/disable the onboard USB ports. Setting options:
All Enabled, All Disabled, 1&2 USB Port, 2&3 USB Port (optional), 1&3
USB Port (optional), 1 USB Port, 2 USB Port, 3 USB Port (optional).
Note: "3 USB Port", "1&3 USB Port", and "2&3 USB Port" op-
tions appear only when your motherboard uses 8235 South Bridge.
USB Keyboard/Mouse Support
Set to Enabled if you need to use a USB keyboard/mouse in the operating
system that does not support or have any USB driver installed, such as DOS
and SCO Unix.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector
read/write. If your IDE hard drive supports block mode (most new drives do),
select Enabled for automatic detection of the optimal number of block read/
writes per sector the drive can support. Settings: Enabled, Disabled.
PWRON After PWR-Fail
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Off
On
Former-Sts
Leaves the computer in the power off state.
Reboots the computer.
Restores the system to the status before power failure
or interrupt occurred.
3-20