Cisco TelePresence Codec C90 Administrator's Manual page 61

Telepresence system
Hide thumbs Also See for TelePresence Codec C90:
Table of Contents

Advertisement

Cisco TelePresence System Codec C90 and Profile 65" Dual using C90
Contents
Introduction
Video Input Source [4] Connector
Select which video input connector to be active on video input source 4.
Requires user role: ADMIN
Value space: <HDMI/HDSDI>
HDMI: Select HDMI when you want to use the HDMI 4 as input source 4.
HDSDI: Select HD-SDI when you want to use the HD-SDI 4 as input source 4.
Example: Video Input Source 4 Connector: HDMI
Video Input Source [5] Connector
Select which video input connector to be active on video input source 5.
Requires user role: ADMIN
Value space: <DVI/Composite/YC>
DVI: Select DVI-I when you want to use the DVI-I 5 as input source 5.
Composite: Select Composite when you want to use Composite as input source 5.
YC: Select YC when you want to use the S-Video (YC) as input source 5. Connect to the two
connectors marked Y/Comp and C.
Example: Video Input Source 5 Connector: DVI
Video Input Source [1..5] Type
Set which type of input source is connected to the video input.
Requires user role: ADMIN
Value space: <other/camera/PC/DVD/document_camera>
Other: Select Other when some other type of equipment is connected to the selected video
input.
Camera: Select Camera when you have a camera connected to the selected video input.
PC: Select PC when you have a PC connected to the selected video input.
DVD: Select DVD when you have a DVD player connected to the selected video input.
Document_Camera: Select Document_Camera when you have a document camera
connected to the selected video input.
Example: Video Input Source 1 Type: PC
Video Input Source [1..5] CameraControl Mode
Set the camera control mode for the camera associated with the video source.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable camera control.
Off: Disable camera control.
Example: Video Input Source 1 CameraControl Mode: On
D14635.0
6 Profile C90 and Codec C90 Administrator Guide TC4.2, July 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Web interface
Advanced settings
Advanced settings
Video Input Source [1..5] CameraControl CameraId
Select the ID of the camera in the Visca chain that is connected to this camera source. The
CameraId setting represents the camera's position in the Visca chain.
Requires user role: ADMIN
Value space: <1..5>
Example: Video Input Source 1 CameraControl CameraId: 1
Video Input Source [1..5] OptimalDefinition Profile
Adjust how rapidly the system will increase the transmitted resolution when increasing the
bandwidth. NOTE: Requires that the Video Input Source Quality is set to Motion.
Normal: Use this setting for normal to poorly lit environment. If the source is a camera with
1920x1080p60, the system will transmit 1920x720p60 at about 2.2Mb/sec and above with this
setting set to normal.
Medium: Requires better than normal and consistent lighting and good quality video inputs. If the
source is a camera with 1920x1080p60, the system will transmit 1920x720p60 at about 1.4Mb/
sec and above with this setting set to medium.
High: Requires good lighting conditions for a good overall experience and good quality video
inputs. If the source is a camera with 1920x1080p60, the system will transmit 1920x720p60 at
about 1.1Mb/sec and above with this setting set to high.
Requires user role: ADMIN
Value space: <Normal/Medium/High>
Example: Video Input Source 1 OptimalDefinition Profile: Normal
.
61
Password protection
Range: Select the ID of the camera in the Visca chain.
Ref: Table 1 and Table 2.
Table 1: Optimal definition for systems supporting 1080p
w288p30
w448p30
Normal
256 kbit/s
512 kbit/s
Medium
128 kbit/s
384 kbit/s
High
128 kbit/s
256 kbit/s
Table 2: Optimal definition for systems supporting 720p60
w144p60
w288p60
Normal
128 kbit/s
512 kbit/s
Medium
128 kbit/s
384 kbit/s
High
128 kbit/s
256 kbit/s
Administrator guide
Appendices
Contact us
w576p30
720p30
1080p30
768 kbit/s
1152 kbit/s
2560 kbit/s
512 kbit/s
1152 kbit/s
1920 kbit/s
512 kbit/s
768 kbit/s
1472 kbit/s
w448p60
w576p60
720p60
1152 kbit/s
1472 kbit/s
2240 kbit/s
768 kbit/s
1152 kbit/s
1920 kbit/s
512 kbit/s
768 kbit/s
1152 kbit/s
www.cisco.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence c90Profile 65” dual

Table of Contents