Rule 1: The Code 128 Scanning Rule - Motorola Symbol LS9208 Product Reference Manual

products that carry UPC bar codes, placed there by the manufacturer. The Code 128 bar
codes have the following format:
MMMMMPPPPPDD
Where: M = Manufacturer ID
P = Part Number
D = Destination Code
The distribution center uses a PC with dedicated control characters for manufacturer ID
<CTRL M>, part number <CTRL P>, and destination code <CTRL D>. At this center the
UPC data is treated as manufacturer ID code.
The following rules need to be entered:
When scanning data of code type Code 128, send the next 5 characters, send the
manufacturer ID key <CTRL M>, send the next 5 characters, send the part number key
<CTRL P>, send the next 2 characters, send the destination code key <CTRL D>.
When scanning data of code type UPC/EAN, send all data, send the manufacturer ID
key <CTRL M>.
To enter these rules, follow the steps below:

Rule 1: The Code 128 Scanning Rule

Step
1 Begin New Rule
2 Code 128
3 Send next 5 characters
4 Send <CTRL M>
5 Send next 5 characters
6 Send <CTRL P>
7 Send next 2 characters
8 Send <CTRL D>
9 Save Rule
Bar Code On Page Beep Indication
13-7 High High
13-14 High High
13-36 High High
13-81 High High
13-36 High High
13-82 High High
13-35 High High
13-78 High High
13-8 High Low High Low
Advanced Data Formatting
13-3