Scanning In Omni Mode - Motorola Symbol LS9208 Product Reference Manual

Scanning in Omni Mode

In this mode, an omni scan pattern provides rapid, orientation-free scanning. This scan
pattern is used with either hands-free or hand-held scanning.
To scan a bar code, direct it in toward the window of the scanner ("presentation" scanning,
see Figure 2-7 on page
see Figure 2-8 on page
1. Ensure all cable connections are secure.
2. Insert the scanner in the optional hands-free stand by placing the front of the
scanner into the stand's "cradle" (see
surface (see
Note: To mount the optional hands-free adjustable stand, see
Template
3. To scan a bar code, present the bar code and ensure the scan lines cross every
bar and space of the symbol. The scan pattern becomes steady when the scanner
detects the bar code. See
and Figure 2-6 on page 2-5
4. Upon successful decode, the scanner beeps and the green LED flashes
momentarily.
2-6) or from side to side in a sweeping motion ("swipe" scanning,
2-6).
Figure 2-4).
on page 2-15.
Figure 2-5 on page 2-5
for scanning in hand-held mode.
Figure 2-3) or place the scanner on a flat
for scanning in hands-free mode
Scanning
Mounting
2-3