Chapter 11. Symbologies; Introduction - Motorola Symbol LS9208 Product Reference Manual

Bar code scanner

Hide thumbs Also See for Symbol LS9208:

Table of Contents

This chapter describes all symbology features and provides the programming bar codes

necessary for selecting these features for the Symbol LS9208 scanner. Before

programming, follow the instructions in

Chapter 1, Getting

Your scanner is shipped with the settings shown in the

Symbology Default Table

11-3 (also see

Appendix A, Standard Default Parameters

for all host device and

miscellaneous scanner defaults). If the default values suit your requirements, programming

may not be necessary. Features values are set by scanning single bar codes or short bar

code sequences.

To return all features to their default values, all you need to do is scan the

Set All Defaults

bar code on page 4-5.

If you are not using a Synapse or USB cable you must select a host type. Refer to each

host chapter for specific host information.

Show Quick Links

Table of Contents