Rule 1: The Code 128 Scanning Rule
Step
Bar Code
1
Begin New Rule
2
Code 128
3
Send next 5 characters
4
Send <CTRL M>
5
Send next 5 characters
6
Send <CTRL P>
7
Send next 2 characters
8
Send <CTRL D>
9
Save Rule
Rule 2: The UPC Scanning Rule
Step
Bar Code
1
Begin New Rule
2
UPC/EAN
3
Send all remaining data
4
Send <CTRL M>
5
Save Rule
To correct any errors made while entering this rule, scan the Quit Entering Rules bar code on page 11-9. If you
already saved the rule, scan the Erase Previously Saved Rule bar code on page 11-9.
Alternate Rule Sets
Group ADF rules into one of four alternate sets which you can turn on and off when needed. This is useful to format
the same message in different ways. For example, a Code 128 bar code contains the following information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
The bar code might look like this:
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
Ordinarily, data transmits as follows:
24 (class key)
56712437 (stock key)
01500 (enter key)
But, when there is a sale, send only the following:
24 (class key)
56712437 (stock key)
On Page
Beep Indication
11-8
High High
11-11
High High
11-29
High High
11-50
High High
11-29
High High
11-50
High High
11-28
High High
11-49
High High
11-8
High Low High Low
On Page
Beep Indication
11-8
High High
11-13
High High
11-28
High High
11-50
High High
11-8
High Low High Low
Advanced Data Formatting
11 - 3