Initialization Of A, B, D, E, F; Initialization Of A, D Page Data; Initializing A, D; Modification Of A, D - Sony DSC-P31M Service Manual

DSC-P31/P31M
1-2. INITIALIZATION OF A, B, D, E, F, 7, 9 PAGE
DATA
1-2-1.

Initialization of A, D Page Data

1. Initializing A, D Page Data
Note: If the A, D page data has been initialized, the following
adjustments need to be performed again.
1) Modification of A, D page data
2) Video system adjustments
3) LCD system adjustments
4) System control system adjustments
Adjsuting page
Adjsuting Address
Adjusting page
Adjusting Address
Initializing Method:
Order Page Address Data
1 0 01
2 4 03
3 4 00
4 4 01
5 4 02
6
2. Modification of A, D Page Data
If the A, D page data has been initialized, change the data of the
"Fixed data-2" address shown in the following table by manual
input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the
camera may not operate.
3) When changing the data, press the PAUSE button of the
adjusting remote commander each time when setting new data
to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of A, D Page Data:
Order Page Address Data
1 2 00
2 2 01
A
00 to FF
D
10 to 73
Procedure
01
04
2D
2D Press PAUSE button.
Check the data changes to "01".
Perform "Modification of
A, D page Data".
Procedure
29
29 Press PAUSE button.
3. A Page Table
Note 1: Fixed data-1: Initialized data.
(Refer to "1. Initializing the A Page Data")
Note 2: Fixed data-2: Modified data.
(Refer to "2. Modification of A Page Data")
Address Initial value
00, 01
02 00
03 to 61
62
63
64 to 7F
80 9B
81 3C
82 6B
83 71
84 66
85 15
86 08
87 83
88 90
89 83
8A 2E
8B 00
8C
8D
8E
8F
90 to 9F
A0 80
A1, A2
A3
A4
A5 to A8
A9
AAto FF
4. D Page Table
Note 1: Fixed data-1: Initialized data.
(Refer to "1. Initializing the D Page Data")
Note 2: Fixed data-2: Modified data.
(Refer to "2. Modification of D Page Data")
Address Initial value
10 to 1F
20
21 00
22 to 36
37 to 3F
40 to 5A
5B
5C to 73
5-8
Remark
Fixed data-1 (Initialized data)
Test mode
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Backlight current adj. (BL L)
Backlight current adj. (BL H)
VCO adj. (NTSC)
VCO adj. (PAL)
V-COM DC adj.
D Range adj.
Black limit adj.
Psig Gray adj./V-COM adj.
White balance adj.
Contrast adj.
Center voltage adj.
Fixed data-2
Fixed data-1 (Initialized data)
Composite video level adj.
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Remark
Fixed data-1 (Initialized data)
Not used
Test mode
Fixed data-1 (Initialized data)
Not used
Fixed data-1 (Initialized data)
Not used
Fixed data-1 (Initialized data)