Ccd White Defect Compensation - Sony DSC-P31M Service Manual

DSC-P31/P31M

16. CCD White Defect Compensation

Mode
Subject
Measurement Point
Measuring Instrument
Note 1: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Note 2: The"CCD White Defect Compensation" should be made
when the set warms up at certain duration after the power
was turned on, as it is affected with the temperature.
Adjusting method:
Order Page Address Data
1
2 E 64
3 E 64
4 E 69
5 E 69
6 6 01
7 6 02
8 6 55
9 6 01
10 E 64
11 E 69
12 6 01
13 6 02
14 6 55
Processing after Completing Adjustment:
Order Page Address Data
1 6 01
2 E 64
3 E 69
4
RadarW RadarW RadarW RadarW RadarW
CAMERA
Not required
Displayed data of page: 6,
address: 55
Adjusting remote commander
Procedure
Perform "Data setting during
camera system adjustment".
(Refer to page 5-16)
Note down the data.
1E Press PAUSE button.
Note down the data.
0A Press PAUSE button.
8B Press PAUSE button.
Check the data changes to
"01".
Check the data.
00 to 7F: Normal
80 to FF: Defective
00 Press PAUSE button.
0F Press PAUSE button.
60 Press PAUSE button.
87 Press PAUSE button.
Check the data changes to
"01".
Check the data.
00: Normal
01 to FF: Defective
Procedure
00 Press PAUSE button.
Set data noted down at step
2, and press PAUSE button.
Set data noted down at step
4, and press PAUSE button.
Release the data setting
performed at step 1.
(Refer to page 5-13)
5-28