DSC-P31/P31M
Note: Follow the disassembly procedure in the numerical order given.
2-1. CABINET (REAR) BLOCK ASSEMBLY
1 Screw (M2)
[SERVICE POSITION (CD-391 BOARD, PK-062 BOARD, SY-075 BOARD: SIDE B)]
Note 1: Don't use the 12 pin flexible board of CPC-9 jig.
It causes damage to the unit.
Note 2: The old CPC-9 jig (Parts code: J-6082-393-B) Cannot be used,
because it cannot operate the adjustment remote commander.
CPC-9 jig
(J-6082-393-C)
(Note 1, 2)
7 FP-067 flexible board
(CN701)
2 Screw (M2)
4 Claw
AC power
DC-IN
adaptor
Adjustment remote
commander
PK-062 board
18
1
1
18
2-2
6 Cabinet (rear) block assembly
3 Two screws (M2)
5 Claw
DC jack
SY-075 board
CD-391 board
Cabinet (rear) block assembly