Staple Jam In The Saddle Stitch Unit - Toshiba e-studio 2555c Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
12
Close the front cover of the finisher.

Staple jam in the Saddle Stitch unit

1
Open the front cover of the finisher, and pull out the
Saddle Stitch unit until it stops.
2
Remove the staple cartridge.
3
Raise the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the top staple sheet.
50 Clearing a Staple Jam
1 1
2 2