7.2 Diagnostic Settings
The [Diagnostic] tab (® see Page 165) of the web user interface contains applications that can be used to
gather system information about the unit in the form of logs.
7.2.1 Log Settings
General Settings
General Settings (® see Page 165) is used to specify the type of logs outputted (® see Log to standard
output (Page 165) and Log to file (Page 166)) and the maximum log size (® see Log file max size
(Page 166)).
Upload Settings
Upload Setting (® see Page 166) is used to specify the log server for uploading event logs and file names
used for logs. Log files will be uploaded to the log server once the specified file size is reached (® see Upload
immediately once file is full (Page 167)) or the specified upload time has expired (® see Upload period
(Page 167)).
Syslog Settings
Syslog Settings (® see Page 166) is used to enable syslog and specify a Syslog server for the unit to send
log messages to. You can also specify the port used for the Syslog server and the type (severity) of logs sent
Document Version 2014-04
7.2.1 Log Settings
Administrator Guide
299