Cfg_Resync_From_Sip; Usr_Prov_Svr_Url - Panasonic KX-UTG200 Administrator's Manual

Description
Value Range
Default Value

CFG_RESYNC_FROM_SIP

Value Format
Description
Value Range
Default Value
Web User Interface Reference

USR_PROV_SVR_URL

Value Format
Description
Value Range
Document Version 2014-04
Specifies the time (hour:minute) that the unit checks for updates of
configuration files.
00:00–23:59
Note
•
If the value for this setting is any valid value other than an empty
string, the unit downloads the configuration files at the fixed
time, and the settings specified in "CFG_CYCLIC",
"CFG_CYCLIC_INTVL", and "CFG_RTRY_INTVL" are
disabled.
•
If the value for this setting is an empty string, downloading the
configuration files at the fixed time are disabled.
Empty string
String
Specifies the value of the "Event" header sent from the SIP server to
the unit so that the unit can access the configuration files on the
provisioning server.
Max. 15 characters
Note
•
An empty string is not allowed.
check-sync
Header Value for Resync Event (Page 163)
String
Specifies the Provisioning Server URL.
Note
•
The format of the IP address must be in dotted-decimal
notation, FQDN, or URL, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
•
If "{mac}" is included in this URL, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this URL, it will be replaced with the
unit's firmware version.
Max. 1024 characters
5.3.6 Provisioning Settings
Administrator Guide 217