Min_Delay; Nom_Delay; Rtcp_Enable; Rtcpxr_Enable - Panasonic KX-UTG200 Administrator's Manual

MIN_DELAY

Value Format
Description
Value Range
Default Value
Web User Interface Reference

NOM_DELAY

Value Format
Description
Value Range
Default Value
Web User Interface Reference

RTCP_ENABLE

Value Format
Description
Value Range
Default Value
Web User Interface Reference

RTCPXR_ENABLE

Value Format
Description
Document Version 2014-04
Integer
Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
1 or 2 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to "NOM_DELAY"
–
This value must be less than "MAX_DELAY"
–
"MAX_DELAY" must be greater than "NOM_DELAY"
2
Minimum Delay (Page 116)
Integer
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
1–7 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to "MIN_DELAY"
–
This value must be less than "MAX_DELAY"
2
Initial Delay (Page 116)
Boolean
Selects whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
•
Y (Enable RTCP)
•
N (Disable RTCP)
N
RTCP Enable (Page 115)
Boolean
Selects whether to enable RTCPXR.
5.7.1 Per Line - VoIP
Administrator Guide 255