4.8.3.1 Firmware Maintenance
Enable Firmware Update
Description
Value Range
Default Value
Configuration File Reference
Firmware File URL
Description
Value Range
Default Value
Configuration File Reference
4.8.4 Local Firmware Update
This screen allows you to manually update the unit's firmware from a PC by clicking [Update Firmware].
Note
•
After the firmware has been successfully updated, the unit will restart automatically.
Document Version 2014-04
Selects whether to perform firmware updates when the unit detects a
newer version of firmware.
Note
•
Changing this setting may require restarting the unit.
•
Local firmware updates from the Web user interface (® see
4.8.4 Local Firmware Update) can be performed regardless
of this setting.
•
Yes
•
No
Yes
FIRM_UPGRADE_ENABLE (Page 210)
Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
•
Changing this setting may require restarting the unit.
Max. 1024 characters
Not stored.
FIRM_FILE_PATH (Page 210)
4.8.4 Local Firmware Update
Administrator Guide
159