5.5.5 Tone Settings
Description
Value Range
Default Value
Web User Interface Reference
REORDER_TONE_FRQ
Value Format
Description
Value Range
Default Value
Web User Interface Reference
REORDER_TONE_GAIN
Value Format
Description
Value Range
Default Value
REORDER_TONE_RPT
Value Format
Description
Value Range
Default Value
240
Administrator Guide
Specifies the pattern, in milliseconds, of Dial Tone 4 (stutter dial tones)
to notify that a voice mail is waiting, using up to 22 whole numbers (off
1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
Tone Timings (Page 142)
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
480,620
Tone Frequencies (Page 142)
Integer
Specifies the gain, in decibels, of the reorder tone.
(-80)–0
0
Boolean
Specifies whether the reorder tone is repeated.
•
Y (Repeat)
•
N (No Repeat)
Y
Document Version 2014-04