Safety And Approvals Specifications - Epson WorkForce WF-2660 User Manual

Coordination modes
Ethernet
Standards
Communication mode
Connector
Security Protocol
SSL/TLS: HTTPS Server/Client and IPPS
Parent topic:

Safety and Approvals Specifications

United States
Canada
This equipment contains the following wireless module:
• Manufacturer: Askey Computer Corporation.
• Type: WLU6320-D69 (RoHS)
This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product. Operation is subject to the following two conditions: (1) this device may not
Infrastructure mode; simple AP mode compatible
Ad hoc mode; not supported for IEEE 802.11n
WiFi Direct mode; not supported for IEEE 802.11b
IEEE802.3i (10BASE-T); to prevent risk of radio interference, use a
Category-5e or higher shielded twisted pair cable
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); connected device should
be IEEE802.3az compliant
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
RJ-45
Technical Specifications
Safety: UL60950-1
EMC: FCC part 15 Subpart B class B
Safety: CAN/CSA C22.2 No. 60950-1
EMC: CAN/CSA-CEI/IEC CISPR 22 Class B
294