Epson WorkForce WF-2660 User Manual page 37

You see this screen:
5. Select Wi-Fi Setup Wizard.
Note: If you need to disable the wireless network to set up your product on an Ethernet network,
scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired
network connection in this manual.
6. Select the name of your wireless network or enter the name manually.
Note: To enter the wireless network name manually, select Other Networks, then select the
Network (SSID) field. Use the displayed keypad to enter your network name.
7. Select the Password field, and enter your wireless password using the displayed keypad.
8. Press when you're finished entering your password, then select Proceed.
9. Confirm the displayed network settings and select OK to save them.
Note: If you need to change a setting, press the
10. If you want to print a network setup report, press one of the
If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is
lit as shown.
back button.
buttons. (Otherwise, select Done.)
37