Receive Settings - Fax; Security Settings - Fax - Epson WorkForce WF-2660 User Manual

Parent topic:

Receive Settings - Fax

Set the receive options you want to use for incoming faxes.
Setting
Receive Mode
Distinctive Ring
Rings to Answer
Remote Receive
Parent topic:

Security Settings - Fax

Set the security options you want to use for fax data.
Setting Up Fax Features Using the Product Control Panel
Options
Manual
Auto
All
Single
Double
Triple
Double&Triple
1 to 9
Off
On
Start Code
Setting Up Fax Features Using the Product Control Panel
Description
Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the
product.
Automatically receives and prints faxes.
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
product can receive faxes on the correct number of
rings. All works for phone lines that do not use this
service.
Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to for answering a call.
Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to Auto). When you enable this function, you
need to set a Start Code. If you are using a cordless
handset whose base is connected to the product, you
can start receiving the fax by entering the code on the
handset.
171