Product Status Messages - Epson WorkForce WF-2660 User Manual

Parent topic:

Product Status Messages

You can often diagnose problems with your product by checking the messages on its LCD screen.
Note: If the screen is dark, press the screen to wake the product from sleep mode.
LCD screen message
Printer error. Turn the power off and
on again. If the error is not fixed,
contact Epson Support.
A printer's ink pad is nearing the end The ink pads are near the end of their service life and the
of its service life. Please contact
Epson Support.
A printer's ink pad is at the end of its
service life. Please contact Epson
Support.
No dial tone detected. Try the Check Make sure the phone cable is connected correctly and the
Fax Connection.
Combination of IP address and
subnet mask is invalid. See your
documentation.
Communication error
Recovery mode
Parent topic:
Solving Problems
Condition/solution
A serious error has occurred. Turn the product off and then back
on again. If the error continues, check for a paper jam. If there is
no paper jam, contact Epson for support.
message will be displayed until the ink pad is replaced. Contact
Epson to replace ink pads before the end of their service life. (To
resume printing, press one of the
The ink pad is at the end of its service life. Turn off the product
and contact Epson for support.
phone line works. If you connected the product to a PBX (Private
Branch Exchange) phone line or Terminal Adapter, turn off the
Dial Tone Detection setting.
There is a problem with the network connection to your product.
There is a problem with the network connection to your product.
Check the DNS settings for the server, the computer, or the
access point.
An error has occurred during firmware updating. Connect your
product using a USB cable and try downloading the Firmware
Update from Epson's support website. If you still need help,
contact Epson for support.
Solving Problems
239
buttons.)