Wi-Fi Protected Setup (Wps) - Epson WorkForce WF-2660 User Manual

You see this screen:
10. Scroll down to view the SSID (Wi-Fi network name) and password.
11. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
12. Press the
You see an AP connection symbol on the LCD screen and should be able to print directly to your
product from your computer or device.
Note: If the AP connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not
enabled. Repeat these steps to try again.
Parent topic:
Related tasks
Entering Characters on the LCD Screen

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
home button to return to the Home screen.
Wi-Fi Direct Mode Setup
41