Safety And Approvals Specifications - Epson ET-3843 User Manual

Communication modes
Connector
Security
Security protocol
Parent topic:

Safety and Approvals Specifications

United States
Canada
This equipment contains the following wireless module:
• Manufacturer: Seiko Epson Corporation
• Type: J26H006
This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102
of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated so that
the radiator is kept at least 7.9 inches (20 cm) or more away from a person's body (excluding extremities:
hands, wrists, feet and ankles).
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
RJ-45
SSL/TLS; HTTPS Server/Client, IPPS
SNMPv3
Technical Specifications
Safety: UL60950-1
EMC: FCC Part 15 Subpart B Class B
Safety: CAN/CSA-C22.2 No.60950-1
EMC: CAN ICES-3 (B)/NMB-3 (B)
273