Removing Oven Door Handle; Removing Outer Door Panel Assembly; Removing Door Handle Studs - Electrolux E30GF74GPS Technical & Service Manual

Removing oven door handle:

1. Using a 3/32" Allen wrench remove the (4) set
screws, two from the bottom of each end of the
handle, and lift the handle off.

Removing outer door panel assembly:

Note: The outer door panel, outer glass
and Electrolux logo are replaced as a
package.
1. Remove the oven door from the range and
place it face down on a soft surface.
2. Remove the (20) screws, four on each side,
six on the top and six on the bottom,
holding the outer panels to the inner panel and
lift the outer door panel package off.

Removing door handle studs:

1. Remove the outer door panel assembly.
2. Using (2), 10 mm wrenches, one to hold a stud
and one to remove the nut, remove the nut and
lift the stud off.
73