Table of Contents
Advertisement
Compatible plug-in options
6
APPENDIX
6.1 Compatible plug-in options
Compatible plug-in options are listed below.
Name
Vector control
Vector control/encoder pulse dividing output
16-bit digital input
Digital output/extension analog output
Relay output
6.2 Differences from the standard inverter
The following functions are added or deleted in the FR-A700-A1 series, compared to the FR-A700 series.
Function
Adjustable 5 points V/F
Bypass-inverter switchover function
Stop-on contact control/load torque high speed frequency
control
Brake sequence function
Simple position control
Position control
Orientation control
Encoder feedback control
Energy saving monitor function
Stop selection
First cushion voltage/time for restart
Monitor
Applied motor
PID control
Input terminal function selection
Output terminal function selection
Override
Automatic acceleration/deceleration
Dancer control/Winding diameter compensation function/
Tension control function
Regeneration avoidance function
REMARKS
Functions not mentioned above are the same as FR-A700 series standard inverter.
Refer to FR-A700 series catalog or instruction manual for general specifications.
74
Type
Bipolar analog output/high resolution analog
FR-A7AP
input/motor thermistor interface
FR-A7AL
CC-Link communication
FR-A7AX
L
W
ON
ORKS
FR-A7AY
PROFIBUS-DP communication
FR-A7AR
FL-remote communication
Pr. 100 to Pr. 109 are deleted.
Pr. 139 is deleted.
Pr. 135 to Pr. 138 are changed to dancer control function parameters.
Pr. 270 to Pr. 276 are changed to dancer control function parameters.
Pr. 282 to Pr. 284 are deleted.
Pr. 278 to Pr. 281 are changed to dancer control function parameters.
Pr. 419, Pr. 482 to Pr. 494 are deleted.
Pr. 464 to Pr. 481 are changed to dancer control function parameters.
Pr. 420 to Pr. 427, Pr. 429, Pr. 430 are deleted.
Pr. 350 to Pr. 358, Pr. 360 to Pr. 366, Pr. 393, Pr. 396 to Pr. 399 are deleted.
Pr. 367, Pr. 368 are deleted.
Pr. 891 to Pr. 899 are deleted.
Pr. 250 is deleted.
Pr. 163, Pr. 164 are deleted.
Pr. 52 setting range
"26, 27, 40 to 45, 62 to 65" are added. "50, 51" are deleted. "39, 46" are
used for dedicated function monitors.
Pr. 54, Pr. 158 setting range
"39 to 44" are added, "50, 52, 53" are deleted. "46" is used for dedicated
function monitor.
Pr. 71, Pr. 450 setting range
"2" is deleted.
Pr. 128 setting range
"40 to 41" are added, "20, 21" are deleted.
Pr. 131 to Pr. 133 setting range "0 to 100%" was changed to "400 to 600%."
Pr. 575 initial value "1s" was changed to "9999".
Setting range
"30, 32 to 35, 51 to 56, 83 to 90, 93" are added. "15, 19, 74" are deleted.
Setting range
"50 to 54" are added. "17 to 20, 120" are deleted.
Setting range "0 to 200%" was changed to "0 to 1000%."
Pr. 292 setting range
"7, 8" are deleted.
Pr. 702 to Pr. 704, Pr. 706 to Pr. 734, Pr. 737 to Pr. 799 are added.
Pr. 882 setting range
"3" is added.
Name
communication
Application to FR-A700-A1 series
Type
FR-A7AZ
FR-A7NC
FR-A7NL
FR-A7NP
FR-A7NF
Advertisement
Table of Contents
