Sensor (Diverter Gate) Late Jam - Lexmark X850e Service Manual

7500-XXX

288.00 Sensor (diverter gate) late jam

Step Check
1 Check the finisher media entrance roll assembly.
Is the finisher media entrance roll assembly free of
excess wear and contamination?
2 Check the sensor (bridge unit media exit) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Media Path 1.
5. Touch Bridge unit media exit.
Does the display on the operator panel change every
time the sensing area of the above sensor is
interrupted or blocked?
3 Check the sensor (bridge unit media exit) for proper
connection.
Is the above component properly connected?
4 Check the sensor (finisher media entrance) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Media Path 1.
5. Touch Finisher media entrance.
Does the display on the operator panel change every
time the sensing area of the above sensor is
interrupted or blocked?
5 Check the sensor (finisher media entrance) for proper
connection.
Is the above component properly connected?
2-34
MFP Finisher Service Manual
Yes No
Go to step 2. Clean or replace
the finisher
media entrance
roll assembly.
Go to
media entrance
roll assembly
removal" on
page
Go to step 4. Go to step 3.
Replace the Replace the
sensor (bridge connection.
unit media exit).
Go to "Sensor
(bridge unit
media exit)
removal" on
page 4-17.
Go to step 6. Go to step 5.
Replace the Replace the
sensor (finisher connection.
media entrance).
Go to "Sensor
(finisher media
entrance)
removal" on
page 4-97.
"Finisher
4-98.