Stacker Media Bin Full (Mix Size) - Lexmark X850e Service Manual

7500-XXX
Step Check
4 Perform a print test.
Does the error still occur?

Stacker media bin full (mix size)

Step Check
1 Check the stacker bin for obstructions.
Are there any obstructions on the upper and lower
parts of the stacker bin?
2 Check the sensor (stacker bin level 1) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Bin Level.
5. Touch Stacker bin level1.
Does the operator panel display change every time the
sensing area of the sensor (stacker bin level 1) is
blocked by a multiple page document or your finger?
3 Is the sensor (stacker bin level 1) connected properly?
4 Check the sensor (stacker bin level2) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Bin Level.
5. Touch Stacker bin level2.
Does the operator panel display change every time the
sensing area of the sensor (stacker bin level 2) is
blocked by a piece of media or your finger?
2-96
MFP Finisher Service Manual
Yes No
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-116.
Yes No
Remove the Go to step 2.
obstructions.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (stacker connection.
bin level 1).
Go to "Sensor
(stacker bin
level 1)
removal" on
page 4-34.
Go to step 6. Go to step 5.