7500-XXX
Step
6
Check the booklet folding/exit drive motor assembly for
proper operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Finisher Motor Tests.
4. Touch Booklet folding/exit drive motor
Does the above component operate properly?
7
Is the booklet folding/exit drive motor assembly properly
connected?
Is the above component properly connected?
8
Perform a POR.
Does the error continue when the power is turned off/on?
9
Perform a POR.
Does the error continue when the power is turned off/on?
991.11 Booklet stapler error
Step
1
Check the booklet unit stapler assembly.
Is the above component properly inserted into the booklet
maker unit assembly?
2
Check the booklet unit interface connector assembly.
Is the above component free of damage?
2-88
MFP Finisher Service Manual
Check
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Check
Yes
Go to step 8.
Go to step 7.
Replace the
Replace the
booklet folding/exit
connection.
drive motor
assembly.
Go to
"Booklet
folding/exit drive
motor assembly
removal" on
page
4-122.
Replace the
Problem solved.
booklet controller
card assembly.
Go to
"Booklet
controller card
assembly
removal ??" on
page
4-121.
Replace the
Problem solved.
finisher controller
card assembly.
Go to
"Finisher
controller card
assembly
removal" on
page
4-116.
Yes
Go to step 2.
Ensure that the
booklet unit stapler
assembly is
properly inserted.
Go to step 3.
Replace the
booklet unit
interface
connector
assembly.
No
No