Table of Contents
Advertisement
Leica mojo3D, mojo3D Enhancements
11. Tap
to continue to the terrain compensation.
If this is not the first time a terrain compensation has been performed then
there are three options to choose from:
• New Compensation: clears all previous compensation data, use when the
hardware has been reinstalled or moved.
• Update Compensation: improves compensation performance, use only when
hardware has not been re-installed or moved.
• Skip Compensation: skips the step and does not change the stored compen-
sation data.
12. To perform a terrain compensation
drive to a flat, level area and stop.
Tap the square grey button beside
the instruction when the vehicle is
stationary.
13. Turn the vehicle around through 180°, and stop in exactly the same position as
before and tap the grey square button.
14. Wait until the further tuning of the inertial sensors is complete, as shown by the
progress bar, and then tap
to continue.
255
Advertisement
Table of Contents
