Leica mojo3D User Manual page 113

Metric calculation
Leica mojo3D, Automatic Section Control
2. Drive over the previous run at a right
angle, with the master on. Ensure
that there is enough distance before
crossing over the marked line for any
implements to straighten up behind
the vehicle.
3. Measure the distance from the rope
to where the application actually
reacted.
Latency [s] = Distance travelled [m] ÷ Speed [km/h] x 3.6
Example
Assuming that the operator was travelling at 20 km/h and the distance from the rope
to where the application reacted is 5 m:
5 m ÷ 20 km/h x 3.6 = 0.9 seconds Latency
a) Turn On delay
b) Turn Off delay
a
b
113