Leica mojo3D User Manual page 220

Leica mojo3D, mojo3D Enhancements
QuickSteer Switch
Software configu-
ration step-by-step
The QuickSteer switch serves two functions:
• Power isolation for the QuickSteer.
• Remote steering engage function.
The wires on the QuickSteer bus cable are
numbered. These numbers correspond to the
numbered terminal pins on the switch. The switch
is a standard size and should fit into a spare switch
location on the vehicles operating panel.
To set up the mojo3D system to use electric auto-steer, carry out the following steps:
1. On the main navigation screen, tap the settings button.
2. On the flyout menu, tap the Attached devices button.
3. Tap the electric steer kit button, and then tap
4. Tap the vehicle height value field. The on-screen number pad appears.
7
5
2
6
3
mojo3D_018
to continue.
220