Engine Coolant Change - Suzuki GRAND VITARA Owner's Manual

0B-6 Maintenance and Lubrication:
7) Replenish oil until oil level is brought to FULL level
mark on dipstick. (oil pan and oil filter capacity). The
filler inlet is at the top of the cylinder head cover.
Use only engine oil of SG, SH, SJ, SL or SM grade.
Select the appropriate oil viscosity according to the
chart [A].
It is highly recommended to use SAE 5W-30 oil.
However, SAE 10W-30 oil is usable for ambient
temperatures above –18 °C (0 °F).
NOTE
Engine oil capacity is specified below.
However, note that the amount of oil required
when actually changing oil may somewhat
differ from the data depending on various
conditions (temperature, viscosity, etc.)
Engine oil specifications (M16 Engine)
Oil pan capacity: About 4.0 liters (8.4 US pt. / 7.0
lmp pt.)
Oil filter capacity: About 0.2 liters (0.4 US pt. / 0.3
lmp pt.)
Others: About 0.3 liters (0.6 US pt. / 0.5 lmp pt.)
Total: About 4.5 liters (9.5 US pt. / 7.9 lmp pt.)
Engine oil specifications (J20 Engine)
Oil pan capacity: About 5.0 liters (10.5 US pt. / 8.8
lmp pt.)
Oil filter capacity: About 0.2 liters (0.4 US pt. / 0.3
lmp pt.)
Others: About 0.3 liters (0.6 US pt. / 0.5 lmp pt.)
Total: About 5.5 liters (11.6 US pt. / 9.6 lmp pt.)
Proper engine oil viscosity chart
[A]
o
-30 -20 -10
C
o
-22
F -4 14
20W-40, 20W-50
15W-40, 15W-50
10W-40, 10W-50
10W-30
5W-30
0 10 20 30 40
32 50 68 86 104
I4RS0A020002-01
8) Check oil filter and drain plug for oil leakage.
9) Start engine and run it for 3 minutes. Stop it and wait
5 minutes before checking oil level. Add oil, as
necessary, to bring oil level to FULL level mark (hole)
(1) on dipstick.
2. Low level mark (hole)

Engine Coolant Change

WARNING
!
To help avoid danger of being burned, do not
remove radiator cap while engine and
radiator are still hot. Scalding fluid and steam
can be blown out under pressure if cap is
taken off too soon.
Change engine coolant referring to "Cooling System
Flush and Refill: in Section 1F".
IYSQ01020012-01
S5JB0A0206005