Engine Coolant - Suzuki SWIFT Owner's Manual

Automatic Transaxle (AT) Fluid: 10

Engine Coolant: 1, 2

WARNING
Be sure to depress the brake pedal
when moving the gearshift lever, or
the vehicle can move suddenly.
EXAMPLE
6) The handle of the A/T fluid dipstick is
colored red for easy identification.
Remove the dipstick, clean it and push
it back in until the cap seats. Then pull
out the dipstick.
7) Check both sides of the dipstick, and
read the lowest level. The fluid level
should be between the two marks in the
"HOT" range on the dipstick.
(1) FULL HOT
(2) LOW HOT
(3) The lowest point = Fluid level
8) Add just enough specified fluid through
the dipstick hole to fill the transaxle to
81A090
the proper level.
CAUTION
After checking or adding oil, be sure
to insert the dipstick securely.
Changing Oil
Since special procedures, materials, and
tools are required to change the automatic
transaxle oil, it is recommended that you
trust this job to your authorized SUZUKI
dealer.
INSPECTION AND MAINTENANCE
Engine Coolant
63J087
EXAMPLE
63J088
60A208S
8-12
63JP0-01E