Installing Wire Spool And Adjusting Hub Tension - Hobart Handler 140 Owner's Manual

5-8. Installing Wire Spool And Adjusting Hub Tension

Installing 8 in. (203 mm) Wire Spool
Retaining ring used
with 8 in. (203 mm)
spool only.
Tools Needed:
OM-925 Page 18
.
A complete Parts List is available at www.HobartWelders.com
Installing 4 in. (102 mm) Wire Spool
Adapter used with 8 in.
(203 mm) spool only.
Align locking hole in
spool with locking pin
on spool hub.
1/2 in.
When a slight force is needed
to turn spool, tension is set.
When a slight force is needed
to turn spool, tension is set.
803 012 / 803 013 -B / Ref. 802 971-C