Installing Wire Spool And Adjusting Hub Tension - Hobart IronMan 240 Owner's Manual

5-8. Installing Wire Spool And Adjusting Hub Tension

Installing 1 Or 2 lb Wire Spool
OM-284833 Page 18
.
A complete Parts List is available at www.HobartWelders.com
Spindle
Spindle
Order two additional 5/8 washers
Part No. 605941
Order additional spring
Part No. 186437
Hand tighten knob clockwise.
When a slight force is needed
to turn spool, tension is set.
To install either a 1 lb or 2 lb wire
spool, follow the procedure as
shown in the illustration.
Remove these
components
from spindle.
Install these
components
onto spindle.
282945A