Section 10 − Accessories/Consumables - Hobart Handler 140 Owner's Manual

SECTION 10 − ACCESSORIES/CONSUMABLES
10-1. Accessories
PART NO.
770 187
194 776
195 186
10-2. Consumables
Item
Contact Tips
.023/.025 in (0.6 mm)
.030 in (0.8 mm)
.035 in (0.9 mm)
MIG Nozzle (Standard)
Gasless Flux Cored Nozzle
Tip Adapter
Wire Inlet Guide
Replacement Liners
.023/.025 in (0.6 mm)
.030/.035 in (0.8/0.9 mm)
.035/.045 in (0.9/1.2 mm)
*Available at farm and tool supply retailers.
** Available at Hobart/Miller welding distributors.
10-3. Replacement Drive Rolls
PART NO.
202 925
202 926
10-4. Regulator/Flowmeter
PART NO.
221 037**
770 198*
212 492**
*Available at farm and tool supply retailers.
**Available at Hobart/Miller welding distributors.
A complete
www.HobartWelders.com
To maintain the factory original performance of your equipment, use only Manufacturer's Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-925 Page 42
DESCRIPTION
Running Gear/Cylinder Rack
Small Running Gear/Cylinder Rack
Protective Cover
Hobart Package Part No.*
770 174 (5 per package)
770 177 (5 per package)
770 180 (5 per package)
770 404
770 487
770 402
—
196 139
196 139
196 140
For All Feed Head Assemblies
WIRE DIAMETER
INCHES (mm)
.023/.025 (.6) and .030/.035 (.8 and .9)
.030/.035 (.8 and .9) and .045 (1.2 VK Groove)
REMARKS
For Argon and Argon mixed shielding gas. Use with
replacement hose 222 874.
For CO shielding gas. Use with replacement gas hose
2
Parts List
For One Small Gas Cylinder, 100 lb (45 kg) max.
For One Small Gas Cylinder, 75 lb (34 kg) max.
144 108.
is available
REMARKS
Weatherproof Nylon
Miller Package Part No. **
087 299 (10 per package)
000 067 (10 per package)
000 068 (10 per package)
169 715
226 190
169 716
203 025
194 010
194 011
194 012
on-line at