Serial Number And Rating Label Location; Selecting A Location And Connecting Input Power - Hobart Handler 140 Owner's Manual

5-6. Serial Number And Rating Label Location

The serial number and rating information for this product is located on back. Use rating label to determine input power requirements and/or rated output.
For future reference, write serial number in space provided on back cover of this manual.

5-7. Selecting A Location And Connecting Input Power

!
Do not move or operate unit
where it could tip.
1 Grounded Receptacle
A 115 volt, 20 ampere individual branch
circuit protected by time-delay fuses or
circuit breaker is required.
.
A complete Parts List is available at www.HobartWelders.com
18 in.
(460 mm)
2 Plug From Unit
Select extension cord of 12 AWG for up to
50 ft (15 m) or 10 AWG for 50 up to 100 ft
(30 m).
1
18 in.
(460 mm)
!
Special installation may
required where gasoline or volatile
liquids are present − see NEC
Article 511 or CEC Section 20.
OM-925 Page 17
2
be
803 712-C