Econo Operation - Daikin Super Multi Plus D-Series Service Manual

Instruction

2.2.9 ECONO Operation

ECONO Operation
ECONO operation is a function which enables efficient operation by lowering the maximum power
consumption value.
To start ECONO operation
1. Press "ECONO button".
• "
To cancel ECONO
operation
2. Press "ECONO button" again.
• "
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the operation stop
button causes the settings to be canceled, and the "
• ECONO operation is a function which enables efficient operation by limiting the power
consumption of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY, and HEAT modes. The fan strength
does not change in ECONO operation.
• POWERFUL operation and ECONO operation cannot be used at the same time.
Priority is given to POWERFUL operation.
• Power consumption may not drop even if ECONO operation is used, when the level of
power consumption is already low.
182
" is displayed on the LCD.
" disappears from the LCD.
ECONO
ON/OFF
TEMP
POWERFUL
MODE FAN SWING
SILENT COMFORT SENSOR
ON CANCEL
OFF
TIMER
" disappears from the LCD.
SiEBE18-526
1, 2
System Configuration