Daikin Super Multi Plus D-Series Service Manual page 356

SiEBE18-526
Step
4 Disconnect the HPS
connector and the
electrical box connector
from each other.
5 Remove the TYRAP
fixture and unbind the
leads.
6 Remove the TYRAP
fixture (reactor lead).
7 Remove the screw.
8 Remove the TYRAP
fixture (reactor lead).
9 Remove the two clamps
and disconnect the
compressor lead.
Removal Procedure
Procedure
HPS connector: Red
Electrical box connector: White
Cut off with nippers.
The TYRAP fixture is to be kept
in stock.
(Q0483)
Cut off with nippers.
(Q0484)
Cut off with nippers.
(Q0485)
Outdoor Unit
Points
345