How To Set The Terminal Number - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Startup
Quick Start

2.3.2 How to Set the Terminal Number

Prerequisites
18
For configuring the phone's DNS name, please refer to
If the browser displays a certificate notification, accept it. The start page of the
web interface appears. In the upper right corner, the phone number, the
phone's IP address, as well as the DNS name assigned to the phone are
displayed. The left column contains the menu tree.
3) Click on the "Administrator Pages" tab. In the dialog box, enter the admin
password. The default password is 123456.
4) The administration main page opens. The left column contains the menu tree.
If you click on an item which is printed in normal style, the corresponding
dialog opens in the center of the page. If you click on an item printed in bold
letters, a sub-menu opens to the right of the main menu.
Related Topics
• If the user and administrator menus are needed in the course of setup, the
terminal number, which by default is identical with the phone number, must be
configured first. When the phone is in delivery status, the terminal number
input form is presented to the user/administrator right after booting, unless the
Plug&Play facility of the DLS is used. For further information about this
setting, please refer to
is configured as follows:
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
Terminal Identity. With the WBM, the terminal number
A31003-D3000-M100-01-76A9, 02-2013
Terminal Hostname.