Examples and HowTos
Canonical Dialing
5 Examples and HowTos
5.1 Canonical Dialing
5.1.1 Canonical Dialing Settings
5.1.2 Canonical Dial Lookup
232
Related Topics
Related Topics
The following example shows settings suitable for the conversion of given dial
strings to canonical format. The example phone is located in Nottingham, UK.
Parameter
Local country code
National prefix digit
Local national code
Minimum local number
length
Local enterprise node
PSTN access code
Operator codes
Emergency numbers
Initial extension digits
Related Topics
The following example shows settings suitable for recognizing incoming numbers
and assigning them to entries in the local phone book, and for generating correct
dial strings from phone book entries, depending on whether the number is internal
or external.
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
Example
value
44
International country code for the UK.
0
Used in front of national codes when dialed
-without international prefix.
115
Area code within the UK (here: Notting-
ham).
7
Minimum number of digits in a local PSTN
number (e. g. 3335333 = 7 digits).
780
Prefix to access Nottingham numbers from
within the Siemens network.
9
Prefix to make an international call in the
UK.
0,7800
Set of numbers to access the local opera-
tors. (No blank after comma, or else the
subsequent entry is ignored.)
999,555
Set of numbers to access emergency ser-
vices. (No blank after comma, or else the
subsequent entry is ignored.)
2,3,4,5,6,8
1st digits of numbers that are used for
extension numbers on the local node. (No
blank after comma, or else the subsequent
entry is ignored.)
A31003-D3000-M100-01-76A9, 02-2013
Explanation