Settings For A Dss Key - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.11.6.2 Settings for a DSS key

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
|--- DSS operation
|--- Deflect to DSS
|--- Refuse DSS pickup
|--- Forwarding shown
|
--- Admin
|--- System
|--- Features
|--- Configuration
|--- General
|--- DSS Pickup timer
Related Topics
The Key label <n> parameter provides the DSS key with a label that is displayed
on the graphic display on OpenScape Desk Phones. The label is also user config-
urable.
Address contains the call number of the line associated with the DSS key.
The Realm parameter stores the SIP Realm of the line associated with the DSS
key.
User Identifier gives the SIP user ID of the line associated with the DSS key.
Password provides the password corresponding to the SIP user ID.
The Outgoing calls parameter determines the behavior of a call over the DSS
line at the target phone. If set to "Direct", any forwarding and Do not Disturb
settings on the target phone will be overridden, so that a call will always alert. If
set to Line type is set to "Normal", this is not the case, and the call will be treated
like a regular call.
Action on calls defines the handling of an active call when pressing the DSS key.
If set to "Consult", the user has an option to start a consultation with the DSS
target. If set to "Transfer", the user can only transfer the call to the DSS target. If
"No action" is selected, pressing the DSS key will have no effect.
When Allow in Overview is set to "Yes", the line corresponding to the DSS key
will be visible in the line overview on the phone's display.
Data required
• Key label <key number>: Label to be displayed on the display.
Default: "DSS"
• Address: SIP Address of Record of the destination that is assigned to the
DSS key.
• Realm: SIP Realm of the DSS destination.
Administration
Multiline Appearance/Keyset
161