Checking The Clutch Release Cylinder; Assembling And Installing The Clutch Release Cylinder - Yamaha FJR1300R Service Manual

HYDRAULIC CLUTCH
EAS00314
CHECKING THE CLUTCH RELEASE
CYLINDER
Recommended clutch component
replacement schedule
Piston seal
Clutch hose
Clutch fluid
1. Check:
• clutch release cylinder body 1
Cracks/damage → Replace the clutch
release cylinder.
2. Check:
• clutch release cylinder 1
• clutch release cylinder piston 2
Rust/scratches/wear → Replace the clutch
release cylinder and clutch release cylinder
piston as a set.
EAS00315
ASSEMBLING AND INSTALLING THE
CLUTCH RELEASE CYLINDER
1. Install:
• copper washers 1
• clutch hose 2
• union bolt 3
WARNING
@
Proper clutch hose routing is essential to
insure safe motorcycle operation. Refer to
"CABLE ROUTING".
CAUTION:
@
When installing the clutch hose onto the
clutch release cylinder, make sure the
clutch pipe a touches the projection b on
the clutch release cylinder.
4 - 57
CHAS
Every two years
Every two years
Every two years
and whenever the
clutch is disassem-
bled
New
30 Nm (3.0 m · kg, 22 ft · lb)