Removing The Clutch - Yamaha FJR1300R Service Manual

CLUTCH
EAS00275
EAS00277

REMOVING THE CLUTCH

1. Remove:
• rear balancer weight
Refer to "BALANCERS".
2. Remove:
• clutch cover 1
NOTE:
@
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
3. Straighten the lock washer tab.
4. Loosen:
• clutch boss nut 1
NOTE:
@
While holding the clutch boss 2 with the uni-
versal clutch holder 3, loosen the clutch boss
nut.
Universal clutch holder
YM-91042
5. Remove:
• clutch boss nut 1
• lock washer 2
• clutch boss assembly 3
NOTE:
@
There is a built-in damper between the clutch
boss and the clutch plate. It is not necessary to
remove the wire circlip 4 and disassemble the
built-in damper unless there is serious clutch
chattering.
5 - 47
ENG