Installing The Middle Driven Shaft Assembly - Yamaha FJR1300R Service Manual

MIDDLE GEAR
NOTE:
While holding the middle drive shaft 2.
3. Bend the lock washer tab along a flat side of
the nut.
INSTALLING THE MIDDLE DRIVEN SHAFT
ASSEMBLY
1. Install:
• middle driven shaft assembly 1
• middle driven shaft shims 2
• middle driven shaft bearing housing bolts
NOTE:
@
Finger tighten the middle driven shaft housing
bolts.
2. Tighten:
• middle driven shaft nut 1
NOTE:
• While holding the middle drive shaft 2.
• Lock the threads on the middle driven shaft
nut by staking them with a center punch.
5 - 73
ENG
110 Nm (11.0 m · kg, 80 ft · lb)