CAMSHAFTS
9. Install:
• cylinder head cover gasket
• cylinder head cover
NOTE:
Out of specification → Adjust.
• Apply bond T1541 1 onto the mating sur-
faces of the cylinder head cover and cylinder
head cover gasket.
• Apply bond YGK8624-C1 2 onto the mating
surfaces of the cylinder head cover gasket
and cylinder head.
• Tighten the cylinder head cover bolts stages
and in a crisscross pattern.
5 - 18
ENG
New
10 Nm (1.0 m · kg, 7.2 ft · lb)