Review Section 1 - Kohler K91 Owner's Manual

1
.
In hydraulic systems,
. -
energy from an external source is converted into hydraulic
and flow.
2.
As the load on a hydraulic system is increased, the operating increases.
3.
refer to hydraulic systems which primarily use fluid pressure to transfer energy.
4.
Work is the application of a force through a
5.
Power is the rate at which is done or energy is transferred.
6.
Flow is usually measured in per
7.
An external gear pump
is a
displacement pump.
8.
List the three functions that
a
valve may perform.
1.
3.
9.
A hydraulic actuator converts hydraulic pressure and flow into
1O.A cylinder can only be powered in one direction.
Productivity Series 16