Connector Panel - Sony MSW-A2000 Operation Manual

2-2 Connector Panel

Cooling fan
1 Analog audio input/output
section
8 Time code input/output section
(page 2-20)
9 Audio monitor signal output section
(page 2-21)
1 Analog audio input/output section
1 AUDIO INPUT CH1 to CH4 connectors
2 AUDIO INPUT CH1 to CH4 LEVEL switches
AUDIO INPUT
CH1 CH2 CH3
LEVEL LEVEL
LOW HIGH LOW HIGH LOW
ON ON
OFF OFF OFF
600 600
AUDIO OUTPUT
CH1 CH2 CH3
3 AUDIO OUTPUT CH1
to CH4 connectors
1 AUDIO INPUT CH1 to CH4 (channels 1 to 4)
connectors (XLR 3-pin, female)
Input analog audio signals to channels 1 to 4.
You can record analog audio signals input to these
connectors to any audio track on the tape.
2 Analog video input/output section
(page 2-18)
3 Digital audio input/output
section (page 2-18)
75Ω 75Ω
7 External device connectors
(page 2-20)
CH4
LEVEL LEVEL
HIGH LOW HIGH
ON ON
OFF
600 600
CUE
CH4 OUT
4 CUE OUT connector
(MSW-M2000/M2000P/
M2000E/M2000EP only)
MSW-M2000E/M2000EP
Ethernet
5 Digital signal input/output section
(page 2-19)
Cooling fan
6 Power supply section (see page 2-19)
MSW-A2000/A2000P/M2000/
M2000P/2000
2 AUDIO INPUT CH1 to CH4 (channels 1 to 4)
LEVEL switches
Set these for each channel as shown in the following
table, according to the audio input levels to the
AUDIO INPUT CH1 to CH4 connectors and the
impedance.
AUDIO INPUT CH1 to CH4 LEVEL switch settings
Audio input level and impedance
Level
Impedance
–60 dBu High impedance
(microphone input) (approx. 20 kΩ)
+4 dBu High impedance
(line audio input) (approx. 20 kΩ)
+4 dBm 600Ω
(line audio input)
3 AUDIO OUTPUT CH1 to CH4 (channels 1 to 4)
connectors (XLR 3-pin, male)
These connectors output analog audio signals for
channels 1 to 4.
4 CUE OUT(cue audio output) connector (XLR 3-
pin, male) (MSW-M2000/M2000P/M2000E/
M2000EP only)
When playing back a digital Betacam tape, this
connector outputs the cue audio signal.
Chapter 2 Location and Function of Parts
4 Network connection
section (page 2-19)
5 Digital signal input/
output section (page
2-19)
Switch setting
LOW-OFF
(left position)
HIGH-OFF
(center position)
HIGH-ON 600Ω
(right position)
2-17