Connector Panel (Rear) - Sony PCM-7040 Operation Manual

2-3 Connector Panel (Rear)

6
1 ANALOG audio input/output section
ANALOG INPUT (analog audio input) connectors
(equivalent to XLR type)
CH-1: Inputs the channel 1 analog audio signal (L).
CH-2: Inputs the channel 2 analog audio signal (R).
ANALOG OUTPUT (analog audio output)
connectors (equivalent to XLR type)
CH-1: Outputs the channel 1 analog audio signal (L).
CH-2: Outputs the channel 2 analog audio signal (R).
2 DIGITAL audio input/output section
DIGITAL INPUT (digital audio input) connector
Inputs digital audio signals in the AES/EBU format.
DIGITAL OUTPUT (digital audio output)
connector
Outputs digital audio signals in the AES/EBU format.
3 TIME CODE input/output section
TIME CODE INPUT connector
Inputs the SMPTE/EBU time code.
TIME CODE OUTPUT connector
Outputs the SMPTE/EBU time code.
1
AC IN
ANALOG
INPUT INPUT INPUT
CH-1 CH-2 CH-1
INPUT OUTPUT
MONITOR
CH-1 CH-2
7
8
2 3
DIGITAL TIME CODE
INPUT
CH-2
INPUT OUTPUT INPUT OUTPUT
REMOTE(37P) REMOTE(9P) RS232C
9 0 !`
4 REF VIDEO input section
REF VIDEO INPUT (reference video input)
connector
Inputs a video sync signal.
These are a pair of loop-through connectors.
75-ohm termination switch
ON: The input signal is terminated in 75 ohms.
OFF: High input impedance is set so that the input
signal may be looped through the two connectors
for connection to other equipment.
Chapter 2 Location and Function of Parts and Controls
4 5
REF VIDEO WORD SYNC
75Ω 75Ω
ON ON
INPUT INPUT
OFF OFF
OUTPUT
REMOTE(8P)
!"
(Continued)
2-9